Open-Xchange

From QmailToaster
Jump to navigation Jump to search

Back
AppSuite:Open-Xchange Installation Guide for RHEL8 & Derivatives

#!/bin/bash

# Enter domain, mx(local postfix), imap server, postmaster account password, and ox/mysql administrative password
DOMAIN=domain.tld
MX=localhost.localdomain
IMAP=mx.domain.tld
POSTMASTERPW=postpass
MYSQLPW=mysqlpw

[ ! $DOMAIN ] && echo "No domain" && exit 1
echo $DOMAIN
[ ! $MX ]  && echo "No mx" && exit 1
echo $MX
[ ! $IMAP ]  && echo "No mx" && exit 1
echo $IMAP
[ ! $POSTMASTERPW ]  && echo "No postmaster password" && exit 1
echo $POSTMASTERPW
[ ! $MYSQLPW ]  && echo "No MySQL/OX admin password" && exit 1
echo $MYSQLPW

echo -e "[client]\nuser=root\npassword=$MYSQLPW\nhost=localhost" > $credfile

# Disable SELinux
setenforce 0 && sed -i -e 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config && getenforce

# Open necessary firewall port, and disable selinux
TAB="$(printf '\t')" && GREEN=$(tput setaf 2) && RED=$(tput setaf 1) && NORMAL=$(tput sgr0) && \
 systemctl start firewalld && systemctl enable firewalld && \
 ports=(80 443 3306) && \
 for index in ${!ports[*]}; do echo -n "Opening port: ${ports[$index]} : ";tput setaf 2;firewall-cmd --zone=public --add-port=${ports[$index]}/tcp \
 --permanent;tput sgr0; done && firewall-cmd --zone=public --add-port=53/udp --permanent && \
 echo -n "Reload firewall settings : " && tput setaf 2 && firewall-cmd --reload && tput sgr0

dnf -y install mysql-server httpd postfix rsyslog
systemctl enable --now httpd mysqld 
postconf maillog_file=/var/log/maillog
systemctl enable --now postfix
mysqladmin -uroot password $MYSQLPW
mysqladmin --defaults-extra-file=$credfile reload
mysqladmin --defaults-extra-file=$credfile refresh

# Create OX repo
OXREPO=/etc/yum.repos.d/ox.repo
tee -a $OXREPO <<END
[ox-appsuiteui]
name=Open-Xchange-appsuiteui
baseurl=https://software.open-xchange.com/products/appsuite/stable/appsuiteui/RHEL8/
gpgkey=https://software.open-xchange.com/0xDFD4BCF6-oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m

[ox-backend]
name=Open-Xchange-backend
baseurl=https://software.open-xchange.com/products/appsuite/stable/backend/RHEL8/
gpgkey=https://software.open-xchange.com/0xDFD4BCF6-oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m

# if you have a valid maintenance subscription, please uncomment the
# following and add the ldb account data to the url so that the most recent
# packages get installed

[ox-updates-appsuiteui]
name=Open-Xchange Updates-appsuiteui
baseurl=https://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/RHEL8/
gpgkey=https://software.open-xchange.com/oxbuildkey.pub
enabled=0
gpgcheck=1
metadata_expire=0m

[ox-updates-backend]
name=Open-Xchange Updates-backend
baseurl=https://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/RHEL8/
gpgkey=https://software.open-xchange.com/oxbuildkey.pub
enabled=0
gpgcheck=1
metadata_expire=0m
END

# Install Open Xchange
dnf install open-xchange \
            open-xchange-authentication-database \
            open-xchange-grizzly open-xchange-admin \
            open-xchange-appsuite open-xchange-appsuite-backend \
            open-xchange-appsuite-manifest

echo PATH=$PATH:/opt/open-xchange/sbin/ >> ~/.bashrc && . ~/.bashrc
mysql --defaults-extra-file=/root/sql.cnf -e "CREATE USER 'openexchange'@'localhost' IDENTIFIED BY '$MYSQLPW'"
mysql --defaults-extra-file=/root/sql.cnf -e "GRANT ALL PRIVILEGES ON *.* TO openexchange@localhost"

/opt/open-xchange/sbin/initconfigdb --configdb-pass=$MYSQLPW
/opt/open-xchange/sbin/oxinstaller --no-license --servername=oxserver --configdb-pass=$MYSQLPW \
 --master-pass=$MYSQLPW --network-listener-host=localhost --servermemory 2048

systemctl enable --now  open-xchange
systemctl status  open-xchange

mkdir /var/opt/filestore
chown open-xchange:open-xchange /var/opt/filestore
/opt/open-xchange/sbin/registerfilestore -A oxadminmaster -P $MYSQLPW -t file:/var/opt/filestore -s 1000000
/opt/open-xchange/sbin/registerdatabase -A oxadminmaster -P $MYSQLPW -n oxdatabase -p $MYSQLPW -m true

mv /etc/httpd/conf.d/welcome.conf /etc/httpd/conf.d/welcome.conf.bak

# OX Apache configuration & proxy
OXPROXY=/etc/httpd/conf.d/proxy_http.conf
OXCONF=/etc/httpd/conf.d/ox.conf
tee -a $OXPROXY <<END
LoadModule proxy_http_module modules/mod_proxy_http.so

<IfModule mod_proxy_http.c>
   ProxyRequests Off
   ProxyStatus On
   # When enabled, this option will pass the Host: line from the incoming request to the proxied host.
   ProxyPreserveHost On
   # Please note that the servlet path to the soap API has changed:
   <Location /webservices>
       # restrict access to the soap provisioning API
       Order Deny,Allow
       Deny from all
       Allow from 127.0.0.1
       # you might add more ip addresses / networks here
       # Allow from 192.168 10 172.16
   </Location>

   # The old path is kept for compatibility reasons
   <Location /servlet/axis2/services>
       Order Deny,Allow
       Deny from all
       Allow from 127.0.0.1
   </Location>

   # Enable the balancer manager mentioned in
   # https://oxpedia.org/wiki/index.php?title=AppSuite:Running_a_cluster#Updating_a_Cluster
   <IfModule mod_status.c>
     <Location /balancer-manager>
       SetHandler balancer-manager
       Order Deny,Allow
       Deny from all
       Allow from 127.0.0.1
     </Location>
   </IfModule>

   <Proxy balancer://oxcluster>
       Order deny,allow
       Allow from all
       # multiple server setups need to have the hostname inserted instead localhost
       BalancerMember http://localhost:8009 timeout=100 smax=0 ttl=60 retry=60 loadfactor=50 route=APP1
       # Enable and maybe add additional hosts running OX here
       # BalancerMember http://oxhost2:8009 timeout=100 smax=0 ttl=60 retry=60 loadfactor=50 route=APP2
      ProxySet stickysession=JSESSIONID|jsessionid scolonpathdelim=On
      SetEnv proxy-initial-not-pooled
      SetEnv proxy-sendchunked
   </Proxy>

   # The standalone documentconverter(s) within your setup (if installed)
   # Make sure to restrict access to backends only
   # See: http://httpd.apache.org/docs/$YOUR_VERSION/mod/mod_authz_host.html#allow for more infos
   #<Proxy balancer://oxcluster_docs>
   #    Order Deny,Allow
   #    Deny from all
   #    Allow from backend1IP
   #    BalancerMember http://converter_host:8009 timeout=100 smax=0 ttl=60 retry=60 loadfactor=50 keepalive=On route=APP3
   #    ProxySet stickysession=JSESSIONID|jsessionid scolonpathdelim=On
   #       SetEnv proxy-initial-not-pooled
   #    SetEnv proxy-sendchunked
   #</Proxy>
   # Define another Proxy Container with different timeout for the sync clients. Microsoft recommends a minimum value of 15 minutes.
   # Setting the value lower than the one defined as com.openexchange.usm.eas.ping.max_heartbeat in eas.properties will lead to connection
   # timeouts for clients.  See http://support.microsoft.com/?kbid=905013 for additional information.
   #
   # NOTE for Apache versions < 2.4:
   # When using a single node system or using BalancerMembers that are assigned to other balancers please add a second hostname for that
   # BalancerMember's IP so Apache can treat it as additional BalancerMember with a different timeout.
   #
   # Example from /etc/hosts: 127.0.0.1 localhost localhost_sync
   #
   # Alternatively select one or more hosts of your cluster to be restricted to handle only eas/usm requests
   <Proxy balancer://eas_oxcluster>
      Order deny,allow
      Allow from all
      # multiple server setups need to have the hostname inserted instead localhost
      BalancerMember http://localhost_sync:8009 timeout=1900 smax=0 ttl=60 retry=60 loadfactor=50 route=APP1
      # Enable and maybe add additional hosts running OX here
      # BalancerMember http://oxhost2:8009 timeout=1900  smax=0 ttl=60 retry=60 loadfactor=50 route=APP2
      ProxySet stickysession=JSESSIONID|jsessionid scolonpathdelim=On
      SetEnv proxy-initial-not-pooled
      SetEnv proxy-sendchunked
   </Proxy>

   # When specifying additional mappings via the ProxyPass directive be aware that the first matching rule wins. Overlapping urls of
   # mappings have to be ordered from longest URL to shortest URL.
   #
   # Example:
   #   ProxyPass /ajax      balancer://oxcluster_with_100s_timeout/ajax
   #   ProxyPass /ajax/test balancer://oxcluster_with_200s_timeout/ajax/test
   #
   # Requests to /ajax/test would have a timeout of 100s instead of 200s
   #
   # See:
   # - http://httpd.apache.org/docs/current/mod/mod_proxy.html#proxypass Ordering ProxyPass Directives
   # - http://httpd.apache.org/docs/current/mod/mod_proxy.html#workers Worker Sharing
   ProxyPass /ajax balancer://oxcluster/ajax
   ProxyPass /appsuite/api balancer://oxcluster/ajax
   ProxyPass /drive balancer://oxcluster/drive
   ProxyPass /infostore balancer://oxcluster/infostore
   ProxyPass /realtime balancer://oxcluster/realtime
   ProxyPass /servlet balancer://oxcluster/servlet
   ProxyPass /webservices balancer://oxcluster/webservices

   #ProxyPass /documentconverterws balancer://oxcluster_docs/documentconverterws

   ProxyPass /usm-json balancer://eas_oxcluster/usm-json
   ProxyPass /Microsoft-Server-ActiveSync balancer://eas_oxcluster/Microsoft-Server-ActiveSync

</IfModule>
END
tee -a $OXCONF <<END
<VirtualHost *:80>
       ServerAdmin webmaster@localhost

       DocumentRoot /var/www/html/
       <Directory /var/www/html/>
               Options -Indexes +FollowSymLinks +MultiViews
               AllowOverride None
               Order allow,deny
               allow from all
               RedirectMatch ^/$ /appsuite/
       </Directory>

       <Directory /var/www/html/appsuite>
               Options None +SymLinksIfOwnerMatch
               AllowOverride Indexes FileInfo
       </Directory>
</VirtualHost>
END

systemctl restart httpd

# Create context
/opt/open-xchange/sbin/createcontext -A oxadminmaster -P $MYSQLPW -c 1 -u oxadmin -d "Cntxt Admin" -g Admin \
 -s User -p $MYSQLPW -L defaultcontext -e oxadmin@${DOMAIN} -q 1024 --access-combination-name=groupware_standard

# Create user with above context
/opt/open-xchange/sbin/createuser -c 1 -A oxadmin -P $MYSQLPW -u postmaster -d "Postmaster ($DOMAIN)" -g $DOMAIN \
 -s User -p $POSTMASTERPW -e postmaster@${DOMAIN} --imaplogin postmaster@${DOMAIN} --imapserver $IMAP --smtpserver $MX